Swimline 55000 Page 2 Bedienungsanleitung PDF herunterladen

Item # 55000

Commercial Reel System

For In Ground

Solar Pool Covers

1. Congratulation on your purchase of our Swimline Hydrotools Commercial Quality Solar Reel™ for In Ground Pools.

Please follow the instructions carefully so as to not void our warranty.

2. Please use your solar blanket and reel assembly in the manner it was intended for:

a. Your solar blanket is not a safety cover

b. Remove the solar blanket and Solar Reel™ assembly from the pool completely

before swimming use.

c. Do not store the solar blanket on the ground in direct sunlight, as it will burn the lawn

3. Preparation & Assembly: Check inventory of all items and assemble as illustrated below:

4. Depending upon the size of your pool you will also require one of the following pole sets:

5. Positioning Your Solar Reel:

For Rectangular pools, place Stands at either end of pool.

For Irregular shaped pools, place Stands at some convenient midway point. You will need to

fold Blanket and allow Blanket to unwind in two directions. (See Figure A below)

6. Trimming Your Solar Blanket:

• Lay your Solar Blanket (not provided) on top of water. IMPORTANT! Irregular Shaped Pools will need to have their solar covers

folded at point of placement of Stands! The cover will unroll left and right of Stands & cross pole. Please allow 6 inches more

material on length to allow for a fold where straps will be attached for wind onto reel system. (See Illustrations above)

• With scissors trim blanket to fit shape of pool. Be sure to clear pool edge coping.

RECTANGULAR

IRREGULAR

Unroll Unroll Unroll

7. Assembling The Cross Poles:

All Tube Sets consist of 6 sided Hexagon shaped aluminum tubing. In the 3 Inch range, there are two diameters of tubing,

2.745" and 2.920", the smaller size nesting into the larger size. The 12' and 20' Tube Kits Begin and End with Small Aluminum

Tube Inserts therefore requiring Small Aluminum Tube Inserts at either end. The 16' Tube Kit Begins with a Small Aluminum

Tube Insert and Ends with a Large Aluminum Tube Insert therefore requiring a Small Aluminum Tube Insert at one end and a

Large Aluminum Tube Insert at the other end. The Large Tube Plug is self-alligning. The small Aluminum Tube Insert requires

CAREFUL ALIGNMENT! (See Figure B Below For Proper Alignment)

STANDARD POLE SETS:

Item #5112: 3” Diameter Item #5116: 3” Diameter Item #5120: 3” Diameter

Fits up to 12’ width pool Fits up to 16’ width pool Fits up to 20’ width pool

(3) Piece Set, (13) SS Screws (3) Piece Set, (13) SS Screws (5) Piece Set, (25) SS Screws

HEAVY DUTY POLE SETS:

Item #51160: 3” Diameter Item #51200: 3” Diameter

Fits up to 16’ width pool Fits up to 20’ width pool

(3) Piece Set, (4) 3.25” Axle Bolts (5) Piece Set, (8) 3.25” Axle Bolts

HEAVY DUTY POLE SETS FOR HEAVY WEIGHT COVERS:

Item #51164: 4” Diameter Item #51204: 4” Diameter Item #51205: 5” Diameter

Fits up to 16’ width pool Fits up to 20’ width pool Fits up to 20’ width pool

(3) Piece Set, (6) 4” Axle Bolts (5) Piece Set, (10) 4” Axle Bolts (5) Piece Set, (10) 5.5” Axle Bolts

(2) 4” Aluminum Tube Inserts (2) 4” Aluminum Tube Inserts (2) 5” Aluminum Tube Inserts

Optional

Casters Set

Available (#55001)

PARTS LIST

2) Adjustable height stands

(4) Sealed bearings (installed)

(4) Plastic end caps for stands

(1) Crank handle with grip

& lock collar

(1) Axel with lock collar

(2) Aluminum tube inserts

(2) Axle Bolts with nuts

(1) Allen key for locking collar

(4) Rubber feet with

attachment hardware

STRAP KIT

(11 Pcs.)

Plastic Screw

(1 extra piece)

(21 Pcs.)

Plastic Strap Plate

(1 extra piece)

(10 Pcs.) Fabric Straps

(1 extra piece)

(1 Pc.)

Phillips Screw Gun Bit

(11 Pcs.)

Stainless Steel

Self-Drilling Screws

(1 extra piece)

Aluminum

Tubing

(Depending On Your Pole Set

Pre-Drills & Hardware May Vary)

Crank

Lock

Collar

Lock

Collar

Axle

Bolt

Axle

Bolt

Wheel

Bearing

Wheel

Bearing

Plastic Plug

Wheel

Bearing

Wheel

Bearing

Plastic Plug

(2 Pcs.)

Aluminum Tube

Inserts

Stand Stand

Allen

Screw

Allen

Screw

Allen

Wrench

Axle

End View

Small

Aluminum Tube

End View

Small

Aluminum

Tube Insert

ALUMINUM

TUBE INSERT

MUST

ENGAGE

TEETH

INSIDE

SMALL

ALUMINUM

TUBE!

8. For 3 inch range pole sets, you will use a series of pre-drilled holes, spaced approximately 1-1/2" and 7-1/2" inches from

each end, to join the large tubing to the small tubing. These holes are space 120 degrees apart. At the appropriate time you will

secure with self-drilling and tapping SS screws. Also take note of large holes that pierce both end tubes. You will eventually use

these holes to anchor tubing to Crank Handles with Axle Bolts provided.

Fig. A

Fig. B

Inhaltsverzeichnis

Seite 1 - Solar Pool Covers

Item # 55000Commercial Reel SystemFor In GroundSolar Pool Covers1. Congratulation on your purchase of our Swimline Hydrotools Commercial Quality Sola

Kommentare zu diesen Handbüchern

Keine Kommentare

Swimline 55000 Page 2 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör fürs Wasser Swimline 55000 Page 2 herunter. Swimline 55000 Page 2 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör fürs Wasser Swimline 55000 Page 2